You are here: Home > Products > Battery Charger & Transformer > AGM/GEL Battery Charger > SON-1203D
AGM/GEL Battery Charger
Three -stage charging method for the effcient(constant current,constant voltage,trickle)PWM charge mode
With battery -line detection,short circuit,overcurrent,overvoltage and reversepolarity protection and other function.
The display of rechargeable battery charging process directly reflects faciliate users to quickly underst and the current state of the battery.
12v 3a Car battery charger | |
Model | SON-1203D |
Input Voltage | 100V-240V |
Output Voltage | 12V |
Rated Frequency | 47-63HZ |
Charger Current | 3A |
Charger Mode | Three-Phase |
Power factor | ≥0.85 |
Full load efficiency | ≥ 87% |
Mechanical shock and quake-proof degree | Agree with the SAEJ1378 requirements |
Temperature range | -30−+90℃ |
Three-phase charging mode
Constant current mode: When the voltage of the battery is lower than the value set by the charger, the charger will work under the constant current mode and supply the constant current for the battery.
Constant voltage mode: Using the pulse width modulation(PWM) tech to control the charging current and output voltage of the charger which ensures the battery is fully charged and avoids over charging.
Floating charge mode: When the voltage of the battery is approaching the value of the constant voltage mode, and the current will cut down to the given current gradually, that means the battery power is full, then the pilot lamp will turn green and the fan will stop working. The charger will turn the mode into floating charge mode automatically. At this moment, the battery can be stopped charging or keep on floating charge for half an hour.